In brief
An air conditioning with heating function can heat rooms and sometimes replace the main heating. This requires a design for the entire heating demand, not just an appliance that warms the living room on a soft autumn day. If you want to get rid of your kettle, have all the desired rooms and hot water evaluated before deciding which existing parts may disappear.
This explanation is part of air conditioning & heat pumps.
What changes in the way of heating?
An air-to-air heat pump emits heat to the room air. Daikin therefore distinguishes itself from an air-to-water heat pump that can operate a water-based delivery system. So an ordinary air conditioning unit does not become the new heat source for your radiators. Describe if you like warm air in the places where you sit or work. Ask where the internal units are located and how air distribution and operation are adjusted to use.
One warm living room is not the same as a warm home
Check every room: kitchen, desk, bedrooms, bathroom and passageways that you want to keep comfortable. List doors that are usually closed. Flanders points out that complete replacement requires sufficient internal units with adequate capacity. Let the proposal clearly indicate which rooms heat the system and which ones do not. A non-recorded bathroom or guest room shall not remain a hidden assumption in a plan to remove the boiler.
Ask for the design for cold days
Discuss which outdoor situation and desired indoor temperatures are the starting point. Ask for the heating performance of the combination offered under those conditions, not only the cooling capacity on the product name. If you want to keep existing heating for the time being, please record when you use it and how you use the two controls. That's a different assignment than a complete switch. Also ask how a possible capital estimate was made.
How will hot water for the shower be provided?
Write separately how kitchen and bathroom get hot water today. In the case of normal air-air configuration, this function does not automatically belong to the indoor units; special combined systems should be explicitly proposed as such. So ask which installation stays or recovers when you do not want to use the boiler anymore. Take that investment and the space needed in the comparison. Otherwise, you compare a partial solution with a complete heating and hot water installation.
Discuss supplement and complete switch separately
Ask Wattra to explicitly name your target: less use of the existing heating in some rooms, or full replacement. Send your municipality, ground plan, current heat source, hot water system and well-known consumption data. List upcoming insulation works and the rooms where today is not comfortable enough. Wattra discusses air conditioning and heat pump installations throughout Flanders. Allow the chosen scope and any remaining provisions to be included in the proposal, without assuming a fixed saving in advance.
Sources & further reading
Official background to the technical explanation. Consulted on 18 September 2026. A manufacturer's source doesn't confirm that we supply that brand.
General decision guidance, not a technical inspection report or a personal return calculation. Your installation or garden requires a separate assessment.
View the related service
